Introduction: the cement rotary kiln, divided on two types namely dry process kiln and wet
process kiln is main equipment for the production line of cement clinker calcination. The rotary kiln
manufactured by Y.H. Heavy can satisfy the requirement of 300t/d~5000t/d cement production
line. It has advantages of smooth running, high quality product and low energy consumption.
Inclination of the kiln ：3.5%~4.0%
Suitable materials: clinker, limestone, bauxite, bentonite clay and active lime etc.
Application: the cement rotary kiln is main equipment for dry & wet process production line of cement clinker, it’s applied in various cement plant.
1、 Steady running, easy to operate
The cement kiln made by Y.H. Heavy is featured by its stable structure and steady
running. The calcination system of the kiln adopts the international advanced thrust device
with stable performance, easy to operate and good product quality.
2、 Wide application satisfying 300t/h~5000t/d production lines
The technical transformation can be made based on customers requirement in order to satisfy
the different demands.
3、 Energy-efficient, high investment returns
The kiln body, inclined with the level in certain degree, is supported by support rollers. It’s
equipped also with the thrust device which can control the bulk movement of the kiln body. And
for the driving system, in addition of main transmission, the inching device is also considered
which is used for the kiln slow running when the main power is off, so high efficiency and
energy saving is ensured.
4、 Performed sealing, green environmental protection
The advanced technology has been adopted for sealing devices of kiln head and tail to ensure
the sealing reliability and reduce the dust pollution, its design conforms to National.
During normal running, the kiln is driven to rotate by the power of main motor which is reduced
through the main reducer and then transmitted to the open gearing device. The materials are
fed from the kiln tails (high end of kiln) into the kiln for calcination. Due to the inclination and
slow rotation of the kiln, the materials in the kiln roll in circumferential direction, and move
forward along the axis (from high end to low end), finally the calcined clinker enter in the cooler
via kiln hood. The combustibles are injected in the kiln from the kiln head, and the waste gas
produced by combustibles will, after exchanging with the materials, be discharged from the
河南 . 洛阳
总部地址：中国. 河南. 洛阳. 高新技术产业开发区
产业园地址：中国. 河南. 洛阳. 涧西工业园