Product details / PRODUCT DETAIL

Your current position:HOME > Product series

rotary kiln

  Cement rotary kiln

  Introduction: the cement rotary kiln, divided on two types namely dry process kiln and wet

  process kiln is main equipment for the production line of cement clinker calcination. The rotary kiln

  manufactured by Y.H. Heavy can satisfy the requirement of 300t/d~5000t/d cement production

  line. It has advantages of smooth running, high quality product and low energy consumption.

  Speed :0.25-5r/min

  Inclination of the kiln :3.5%~4.0%

  Production capacity:300-5000t/d

  Suitable materials: clinker, limestone, bauxite, bentonite clay and active lime etc.

Application: the cement rotary kiln is main equipment for dry & wet process production line of cement clinker, it’s applied in various cement plant.

consultation Immediate order



  1、 Steady running, easy to operate

  The cement kiln made by Y.H. Heavy is featured by its stable structure and steady

  running. The calcination system of the kiln adopts the international advanced thrust device

  with stable performance, easy to operate and good product quality.

  2、 Wide application satisfying 300t/h~5000t/d production lines

  The technical transformation can be made based on customers requirement in order to satisfy

  the different demands.

  3、 Energy-efficient, high investment returns

  The kiln body, inclined with the level in certain degree, is supported by support rollers. It’s

  equipped also with the thrust device which can control the bulk movement of the kiln body. And

  for the driving system, in addition of main transmission, the inching device is also considered

  which is used for the kiln slow running when the main power is off, so high efficiency and

  energy saving is ensured.

  4、 Performed sealing, green environmental protection

  The advanced technology has been adopted for sealing devices of kiln head and tail to ensure

  the sealing reliability and reduce the dust pollution, its design conforms to National.


   Working priciples

  During normal running, the kiln is driven to rotate by the power of main motor which is reduced

  through the main reducer and then transmitted to the open gearing device. The materials are

  fed from the kiln tails (high end of kiln) into the kiln for calcination. Due to the inclination and

  slow rotation of the kiln, the materials in the kiln roll in circumferential direction, and move

  forward along the axis (from high end to low end), finally the calcined clinker enter in the cooler

  via kiln hood. The combustibles are injected in the kiln from the kiln head, and the waste gas

  produced by combustibles will, after exchanging with the materials, be discharged from the

  kiln tail.




  • metallurgy chemical kiln

  • limestone kiln

  • rotary cement kiln


You can fill in the following form, the contact information and product needs to be submitted to us, we will contact you as soon as possible, thank you! In order to be able to get in touch with you in time, please be sure to fill in your contact information and requirement.

Submit orders    rewrite


Luoyang Yuhang Heavy Industries Co., Ltd.
Headquarters Address: Advanced Manufacturing Cluster Area, Luoyang, china.
Tel: 0379-62112728 
Post code: 471003
Chinese official l website: Http://
English official website: